At over 15,000 lumens, the Denali D7 light kit is one of the brightest LED lights under 115 mm. A pair of D7s feature fourteen high-intensity 10 watt LEDs that are focused through a proprietary single piece optic that was specifically engineered to create a full bodied spot beam that can reach over 450 m at one lux. The robust heatsink and Active Thermal Management™ work together to keep this high powered lamp cool enough to maintain maximum light output when you need it most.

Still not convinced this light is bright enough? A pair of D7s will outshine fourteen D2 lights and produces more than twice the light output of Denali’s beastly D4 light kit.

The D7 kit uses a HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

The D7 housing is only 112mm round and 100mm deep, and uses cast-in cooling fins to effectively dissipate heat and maximize light output. A durable black powder coated finish and a special Impact PC™ corrosion proof bezel ensures your lights will continue to look great even after repeated stone and debris impacts. All Denali housings are IP67 waterproof & submersible, making sure you’re ready for any adventure that comes your way!

Don’t be gouged by overpriced lights that don’t outperform the competition. The D7 provides industry leading performance and innovative features at a fair price.

Highlights

460m throw, 60m beam width
15330 raw lumens
Total load 140W, 10 amp

Product Specifications

Size: 112 mm square x 74 mm deep
Power Draw: 140 W, 10 amps
Beam Distance: 460 m
Beam Width: 60 m
Raw Lumens: 15330
LED: 10 Watt Cree XPL HI (14, 7 per lamp)

What’s in the box?

Denali 2.0 D7 LED Light x 1 pair

• Instructions For Denali D7

At over 15,000 lumens, the Denali D7 light kit is one of the brightest LED lights under 115 mm. A pair of D7s feature fourteen high-intensity 10 watt LEDs that are focused through a proprietary single piece optic that was specifically engineered to create a full bodied spot beam that can reach over 450 m at one lux. The robust heatsink and Active Thermal Management™ work together to keep this high powered lamp cool enough to maintain maximum light output when you need it most.

Still not convinced this light is bright enough? A pair of D7s will outshine fourteen D2 lights and produces more than twice the light output of Denali’s beastly D4 light kit.

The D7 kit uses a HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

The D7 housing is only 112mm round and 100mm deep, and uses cast-in cooling fins to effectively dissipate heat and maximize light output. A durable black powder coated finish and a special Impact PC™ corrosion proof bezel ensures your lights will continue to look great even after repeated stone and debris impacts. All Denali housings are IP67 waterproof & submersible, making sure you’re ready for any adventure that comes your way!

Don’t be gouged by overpriced lights that don’t outperform the competition. The D7 provides industry leading performance and innovative features at a fair price.

Highlights

460m throw, 60m beam width
15330 raw lumens
Total load 140W, 10 amp

Product Specifications

Size: 112 mm square x 74 mm deep
Power Draw: 140 W, 10 amps
Beam Distance: 460 m
Beam Width: 60 m
Raw Lumens: 15330
LED: 10 Watt Cree XPL HI (14, 7 per lamp)

What’s in the box?

Denali 2.0 D7 LED Light x 1 pair

• Instructions For Denali D7